范文一：英文版夏洛的网读后感

Reading after Charlotte's Web

——A friend in need is a friend in deed

I once read a book named “Charlotte's Web ".It talks about a very moving story which is one of the most remarkablely beautiful memory in my childhood.

This is the gist of the story.Pig Wilbur and the spider Charlotte live in so perfect accord with each other that they built sincere friendship. However, a bad news came like a bolt from the blue: Wilbur will be killed on the Christmas day! "You never die, I'll save you!"by Charlotte when Wilbur was wailing "I don't want to die!" To fulfill her promise, Charlotte devoted all her lifetime and asked no rewards, until the moment she died. After I had read the book,I was in contemplative mood. Only leaving the selfless love and pure kindness，Charlotte's own time was at an end. When this sort of emotion has already been lacked seriously in contemporary society, this story undoubtedly moves the readers.

According to my point ，we need such kind of friendship in our life,so we must learn from Charlotte. As they old saying goes”A friend in need is a friend in deed”.We should help our friends as much as we could when they needed. Let us go into action, let the world become especially fine.

范文二：读《夏洛的网》有感英文版

Finished reading the book《Charlotte's Web》 I tears

can no longer stay in the eye socket, for which I was just helping others could not return the spiders and tears, I shed tears for this only treasure friendship pig, a tiny spider can weave a love net, I think we are in and friends should be when a selfless dedication, "charlotte" to help its people, when you accept others' help you should be a "Wilbur" know gratitude, cherish the hard-won friendship, let us work together, to learn to help others and not to please return, learn to treasure friendship, return for Thanksgiving.

范文三：夏洛特的网 读书报告英文版

Book review: Charlotte ’s Web

2015312179 于洋

Friendship makes life shining

This book is a very lovely story among the animals and people. Whatever happened in this story, the theme is always about the power, the beauty of love —the love in friendship, family. The followings are my own feelings and opinions about this book.

1. Sympathy is very important in education. Wilbur is a weakling pig and Fern ’s father was to kill him. But Fern thought it’s unfair and insisted to keep Wilbur. Fern spent more and more time in the barn, her mother was disproval of it, but her father just chuckled about it. Being na?ve is a privilege for children. As parents, they should protect it and support their children’s sympathy.

2. Love develops love. Wilbur always treated others sincerely and he was willing to believe they were kind and this was a loving place. I think that ’s because he was treated lovingly by Fern. Facts improved that children growing in a happy family tend to be positive, kind and friendly. Wilbur ’s action also influenced other animals, which is obvious.

3. Being humble makes one terrific. In the book, Charlotte wove several words on her web for Wilbur: some pig, terrific, radiant, and at last, humble, which helps him win in the fair. Most of us want to be terrific,

expect to be someone one day, and we can say we have achieved that. However , the most golden thing is to be humble at any time to anyone. It means we forget what we have done snd do what we ought to do modestly.

4. Some parts I love in the book—

When your stomach is empty and your mind is full, it ’s always hard to sleep.

It reminds me of the reasons why I was sleepless at some nights.

“I just love it here in the barn,” said Wilbur. “I love everything about this place. ”

Wilbur came to this barn later than any animals here, but he was the first one regarded it as home and expect every animal to be friendly and nice. Before his coming, the animals were selfish and didn’t care about others and even laughed at each other. Wilbur changed this, he made them care and help others, he made them find the beauty and good quality of others.

“And what thanks do I ever get for these services, I would like to know? Never a kind word for Templeton, only abuse and wisecracks and side remarks. Never a kind word for a rat.”

In this story, Templeton seemed kind of selfish, or in our eyes, rats always care about themselves and they seldom do anything good. These words

spoken by Templeton made me feel sorry and guilty. We tend to judge some people by our own stereotype. Give them the chance and we’ll find they ’re nicer than we imagine.

This book seemed to have a kind of magic that made me laugh, moved, warmed in the busy life, and that’s the reason I think it shouldn’t be missed.

范文四：案例的英文版

It does not exist outside the eu production congener commodity alternative countries, this plan-construct one product price and the China price comparison of their products in China, said the dumping wireless network card for 150.

The European commission said the official gazette Option provide evidence that imports of wireless network card number and price level and market share has negative influence.

Complaints reported that in 2006, Option once dominated the market share, 72 percent in 2007, until the fierce to 5% of 2009. In 2007, China and the United States is the time to enter the European market products.

According to its annual report, Option2009 income from 2008 to 2.68 billion euros 1.47 million euros, a drop of 45.

The company's founder and CEO JanCallewaert admit 2009 is

Huawei, zte, and more than 50% of the total occupy market share,

two American companies are in China, so the wireless network card is China's exports to Europe market occupation.

In Europe, 80% of the wireless network card is sold to network operators, the network operation chamber will offer free service, with provide consumers with equipment. Therefore, in the case of China, in the judgment of the overall interests of export products, the main concerns groups is network operators. If dumping charges, network operators will immediately anti-dumping duties under the influence, and will determine whether the passed on to the consumer.

Safeguard measures that are relatively simple, just for the Chinese products are the profession harm or may bring harm.

Anti-dumping and safeguard measures, the difference is that the anti-dumping is hit the unfair competition, and safeguard measures mainly aims to protect domestic industries threatened

范文五：铝箔英文版的MSDS

Material Safety Data Sheet

Material Name: WROUGHT ALUMINUM PRODUCTS, 1xxx SERIES ALLOYS

ID: 663

* * * Section 1 - Chemical Product and Company Identification * * *

Chemical Formula: Mixture

Product Use: Various fabricated aluminum parts and products.

Other Designations: 1xxx Series Alloys, 1xxx Cladding, 1350BS, 1435, 990LR, 995LR, C01A, C49A, C65A, C99A,

C01B, C18B, C19B, C27B, C178, C479, C481, C531, C794, C798, CZ60, Clad 1100, KB10, MD56, MD115, MD119, MD230,MD251, MD335, RA91, RA179, W006.Alcoa Inc.

201 Isabella Street

Pittsburgh, PA 15212-5858

Phone: Health and Safety: 1-412-553-4649

Emergency Information:

USA: Chemtrec: 1-800-424-9300 or 1-703-527-3887 Alcoa: 1-412-553-4001

* * * Section 2 - Composition / Information on Ingredients * * *

CAS #7429-90-57440-47-3

Component Aluminum Chromium

Percent >99<>

Component Information

Additional compounds which may be formed during processing are listed in Section 8.

* * * Section 3 - Hazards Identification * * *

Emergency Overview

Solid. Silvery. Odorless. Non-flammable as supplied. Small chips, fine turnings and dust from processing may bereadily ignitable.

Explosion/fire hazards may be present when (See Sections 5, 7 and 10 for additional information): = Dust or fines are dispersed in the air.

= Chips, dust or fines are in contact with water.

= Dust or fines are in contact with certain metal oxides (e.g. rust).

= Molten metal is in contact with water/moisture or certain metal oxides.

Dust and fume from processing can cause irritation of eyes, skin and upper respiratory tract.

Potential Health Effects

(If dusts or fumes are generated by processing)

Eyes

Can cause irritation.

Skin

Can cause irritation.

Inhalation

Can cause irritation of upper respiratory tract and other health effects listed below. Cancer hazard.

Page 1 of 10

____________________________________________________________

Issue Date: 08/14/00 Revision: 2.0000Print Date: 08/14/00

Health Effects of Ingredients

Chromium dust Can cause irritation of eyes, skin and respiratory tract. Chromium and trivalent chromium Aluminum dust, fines and fumescutting, grinding).

Some products are supplied with a lubricant/oil coating or have residual oil from the manufacturing process. Oil Mineral oils, untreatedor mildly refinedas "known to be a human carcinogen" by the NTP. Listed as carcinogenic to humans by IARC (Group 1)*.

Health Effects Of Additional Compounds Which May Be Formed During Processing

Hexavalent chromium (Chrome VI)nasal septum, respiratory sensitization, asthma, fluid in the lungs (pulmonary edema), lung damage, kidney

human carcinogen" by the NTP. Listed as carcinogenic to humans by IARC (Group 1)*.

Alumina If the product is heated well above ambient temperatures or machined, oil vapor or mist may be generated. Oil vapor and mistheadache, central nervous system effects (nausea, dizziness and loss of coordination) and drowsiness (narcosis). Welding, plasma arc cutting, and arc spray metalizing can generate ozone. Ozone Can cause irritation of eyes,experimental animals by inhalation have found genetic damage, reproductive harm, blood cell damage, lung damageand death.

Welding fumes Plasma arc cutting can generate oxides of nitrogen. Oxides of nitrogen (NO and NO2) Can cause irritation of(methemaglobin). Can cause cough, shortness of breath, fluid in the lungs (pulmonary edema) and death. Effectsmay be delayed up to 2-3 weeks. Nitrogen dioxide (NO2) (pulmonary fibrosis).

*IARC Classifications

Group 1: The agent is carcinogenic to humans. There is sufficient evidence that a causal relationship existedbetween exposure to the agent and human cancer.

Group 2B: The agent is possibly carcinogenic to humans. Generally includes agents for which there is limitedevidence in the absence of sufficient evidence in experimental animals.Medical Conditions Aggravated By Exposure to the Product

Asthma, chronic lung disease, and skin rashes.

Page 2 of 10

____________________________________________________________

Issue Date: 08/14/00 Revision: 2.0000Print Date: 08/14/00

* * * Section 4 - First Aid Measures * * *

First Aid: Eyes

Flush eyes with plenty of water or saline for at least 15 minutes. Consult a physician.

First Aid: Skin

Wash skin with soap and water for at least 15 minutes. Consult a physician if irritation persists.

First Aid: Inhalation

Remove to fresh air. If unconscious or severely injured, check for clear airway, breathing and presence of pulse.Perform CPR if there is no pulse or respiration. Consult a physician.

* * * Section 5 - Fire Fighting Measures * * *

Flammable Properties

This product does not present fire or explosion hazards as shipped. Small chips, turnings, dust and fines fromprocessing may be readily ignitable.

Fire/Explosion

May be a potential hazard under the following conditions:

= Dust or fines dispersed in the air can be explosive. Even a minor dust cloud can explode violently.

= Chips, dust or fines in contact with water can generate flammable/explosive hydrogen gas. Hydrogen gas couldpresent an explosion hazard in confined or poorly ventilated spaces.

= Fines and dust in contact with certain metal oxides (e.g., rust). A thermite reaction, with considerable heatgeneration, can be initiated by a weak ignition source.

= Molten metal in contact with water/moisture or other metal oxides (e.g., rust). Moisture entrapped by moltenmetal can be explosive. Contact of molten aluminum with other metal oxides can initiate a thermite reaction.

Extinguishing Media

Use Class D extinguishing agents on dusts, fines or molten metal. Use coarse water spray on chips and turnings.Fire Fighting Equipment/Instructions

Fire fighters should wear NIOSH approved, positive pressure, self-contained breathing apparatus and full protectiveclothing when appropriate.

* * * Section 6 - Accidental Release Measures * * *

Small/Large Spill

If molten: Contain the flow using dry sand or salt flux as a dam. Do not use shovels or hand tools to halt the flow ofmolten aluminum. Allow the spill to cool before remelting as scrap.

* * * Section 7 - Handling and Storage * * *

Handling/Storage

Product should be kept dry. Avoid generating dust. Avoid contact with sharp edges or heated metal. Hot and coldaluminum are not visually different.

Requirements for Processes Which Generate Dusts or Fumes

If processing of these products includes operations where dust or extremely fine particulate is generated, obtain andfollow the safety procedures and equipment guides contained in Aluminum Association Bulletin F-1 and National FireProtection Association (NFPA) brochures listed in Section 16. Cover and reseal partially empty containers. Use non-sparking handling equipment. Provide grounding and bonding where necessary to prevent accumulation of staticcharges during dust handling and transfer operations. (See Section 15).

Page 3 of 10

____________________________________________________________

Issue Date: 08/14/00 Revision: 2.0000Print Date: 08/14/00

Local ventilation and vacuum systems must be designed to handle explosive dusts. Dry vacuums and electrostaticprecipitators must not be used. Dust collection systems must be dedicated to aluminum dust only and should beclearly labeled as such. Do not co-mingle fines of aluminum with fines of iron, iron oxide (rust) or other metal oxides. Do not allow chips, fines or dust to contact water, particularly in enclosed areas. Avoid all ignition sources. Good housekeeping practices must be maintained.

Requirements for Remelting of Scrap Material and/or Ingot

Molten metal and water can be an explosive combination. The risk is greatest when there is sufficient molten metalto entrap or seal off the water. Water and other forms of contamination on or contained in scrap or remelt ingot areknown to have caused explosions in melting operations. While the products may have minimal surface roughnessand internal voids, there remains the possibility of moisture contamination or entrapment. If confined, even a fewdrops of water can lead to violent explosions.

All tooling and containers which come in contact with molten metal must be preheated or specially coated and rustfree. Molds and ladles must be preheated or oiled prior to casting. Any surfaces that may contact molten metal(e.g., concrete) should be specially coated.

Drops of molten metal in water (e.g. from plasma arc cutting), while not normally an explosion hazard, can generateenough flammable hydrogen gas to present an explosion hazard. Vigorous circulation of the water and removal of theparticles minimize the hazards.

During melting operations, the following minimum guidelines should be observed:

= Inspect all materials prior to furnace charging and completely remove surface contamination such as water, ice,snow, deposits of grease and oil or other surface contamination resulting from weather exposure, shipment, orstorage.

= Store materials in dry, heated areas with any cracks or cavities pointed downwards.

= Preheat and dry large or heavy items such as ingot adequately before charging into a furnace containing moltenmetal. This is typically done by use of a drying oven or homogenizing furnace. The drying cycle should bring theinternal metal temperature of the coldest item of the batch to 400°F and then hold at that temperature for 6 hours.

* * * Section 8 - Exposure Controls / Personal Protection * * *

Engineering Controls

Use with adequate explosion-proof ventilation to meet the limits listed in Section 8.

Personal Protective EquipmentRespiratory Protection

Use NIOSH-approved respiratory protection as specified by an Industrial Hygienist or other qualified professional ifconcentrations exceed the limits listed in Section 8. Suggested respiratory protection: P95

Eye Protection

Wear safety glasses/goggles to avoid eye contact.

Skin Protection

Wear impervious gloves to avoid repeated or prolonged skin contact with residual oils and to avoid any skin injury.General

Personnel who handle and work with molten metal should utilize primary protective clothing like face shields, fireresistant tapper's jackets, leggings, spats and similar equipment to prevent burn injuries. In addition to primaryprotection, secondary or day-to-day work clothing that is fire resistant and sheds metal splash is recommended foruse with molten metal.

____________________________________________________________

Issue Date: 08/14/00 Revision: 2.0000Print Date: 08/14/00

Page 4 of 10

Minimize breathing oil vapors and mist. Remove oil contaminated clothing; launder or dry-clean before reuse.Remove oil contaminated shoes and thoroughly clean and dry before reuse. Cleanse skin thoroughly after contact,before breaks and meals, and at the end of the work period. Oil coating is readily removed from skin with waterlesshand cleaners followed by a thorough washing with soap and water.

Exposure Guidelines

A: General Product Information

Alcoa recommends an Occupational Exposure Limit for Oil Mist of 0.5 mg/m3 TWA.B: Component Exposure Limits

Aluminum (7429-90-5)

ACGIH 10 mg/m3 TWA (metal dust)

OSHA 15 mg/m3 TWA (total dust); 5 mg/m3 TWA (respirable fraction)

Chromium (7440-47-3)

ACGIH 0.5 mg/m3 TWAOSHA 1 mg/m3 TWA

C: Additional Compounds Which May be Formed During Processing

Alumina (non-fibrous) (1344-28-1)

ACGIH as Al: 10 mg/m3 TWA (The value is for total dust containing no asbestos and <>

crystalline silica)

OSHA 15 mg/m3 TWA (total dust); 5 mg/m3 TWA (respirable fraction)

Chromium (II) compounds (Not Available)

OSHA 0.5 mg/m3 TWA (as Cr)

Chromium (III) compounds (as Cr) (Not Available)

ACGIH as Cr: 0.5 mg/m3 TWA

Chromium (VI) compounds- water soluble (Not Available)

ACGIH 0.05 mg/m3 TWA

Chromium (VI) compounds (certain water insoluble forms) (Not Available)

ACGIH 0.01 mg/m3 TWA

Chromic acid and chromates (7738-94-5)

OSHA and chromates: C 1 mg/10m3

Welding fumes (NOC) (Not Available)

ACGIH 5 mg/m3 TWA

Ozone (10028-15-6)

ACGIH Heavy work: 0.05 ppm TWA; Moderate work: 0.08 ppm TWA; Light work: 0.1 ppm TWA;

heavy, moderate or light work, <= 2hrs:="" 0.20="">

OSHA 0.1 ppm TWA; 0.2 mg/m3 TWA

Nitrogen dioxide (10102-44-0)

ACGIH 3 ppm TWAACGIH 5 ppm STEL

OSHA C 5 ppm; C 9 mg/m3

Nitric oxide (10102-43-9)

ACGIH 25 ppm TWA

OSHA 25 ppm TWA; 30 mg/m3 TWA

Page 5 of 10

____________________________________________________________

Issue Date: 08/14/00 Revision: 2.0000Print Date: 08/14/00

* * * Section 9 - Physical & Chemical Properties * * *

Physical State:Boiling Point:Vapor Pressure:Solubility Water:

Density:

Odor:

Octanol-Water Coefficient:

Solid: sheet, plate, wire, rod,bar, extrusion, forgings, etc.Not applicable

Not applicableNone

Range: generally 2.70-2.71g/cm3 (0.097-0.098 lb/in3)None

Not applicable

Appearance:Melting Point:Vapor Density:Specific Gravity:

pH Level:Odor Threshold:

Silvery

Range: generally 1190-1215 oF(643-657 oC)Not applicableSee DensityNot applicableNot applicable

* * * Section 10 - Chemical Stability & Reactivity Information * * *

Stability

Stable under normal conditions of use, storage, and transportation as shipped.

Conditions to Avoid

Chips, fines, dust and molten metal are considerably more reactive with the following:

= Water: Slowly generates flammable/explosive hydrogen gas and heat. Generation rate is greatly increased withsmaller particles (e.g., fines and dusts). Molten metal can react violently/explosively with water or moisture,particularly when the water is entrapped.

= Heat: Oxidizes at a rate dependent upon temperature and particle size.

= Strong oxidizers: Violent reaction with considerable heat generation. Can react explosively with nitrates (e.g.,ammonium nitrate and fertilizers containing nitrate) particularly when heated or molten.

= Acids and alkalis: Reacts to generate flammable/explosive hydrogen gas. Generation rate is greatly increasedwith smaller particles (e.g., fines and dusts).

= Halogenated compounds: Many halogenated hydrocarbons, including halogenated fire extinguishing agents,can react violently with finely divided aluminum.

= Iron oxide (rust) and other metal oxides (e.g., copper and lead oxides): A violent thermite reactiongenerating considerable heat can occur. Reaction with aluminum fines and dusts requires only very weak ignitionsources for initiation. Molten aluminum can react violently with iron oxide without external ignition source.= Iron powder and water: An explosive reaction forming hydrogen gas occurs when heated above 1470°F(800°C).

* * * Section 11 - Toxicological Information * * *

Health Effects of Ingredients

A: General Product InformationNo information available for product.B: Component Analysis - LD50/LC50

No LD50/LC50's are available for this product's components.

Carcinogenicity

A: General Product InformationNo information available for product.B: Component CarcinogenicityChromium (7440-47-3)

ACGIH A4 - not classifiable as a human carcinogenIARC Monograph 49; 1990

____________________________________________________________

Issue Date: 08/14/00 Revision: 2.0000Print Date: 08/14/00

Page 6 of 10

* * * Section 12 - Ecological Information * * *

Ecotoxicity

A: General Product InformationNo information available for product.

B: Component Analysis - Ecotoxicity - Aquatic ToxicityNo ecotoxicity data was found for this product's components.Environmental Fate

No information available for product.

* * * Section 13 - Disposal Considerations * * *

Disposal Instructions

Reuse or recycle material whenever possible. Material may be disposed of at an industrial landfill.

US EPA Waste Number & Descriptions

A: General Product Information

RCRA Status: Must be determined at time material is disposed. If material is disposed as waste, it must becharacterized under RCRA according to 40 CFR, Part 261, or state equivalent in the U.S.B: Component Waste Numbers

RCRA waste codes other than described under Section A may apply depending on use of product. Refer to 40 CFR261 or state equivalent in the U.S.

* * * Section 14 - Transportation Information * * *

Special TransportationNotes:

Proper Shipping Name:Hazard Class:UN NA Number:Packing Group:RQ:

Other - Tech Name:

Other - Marine Pollutant:Notes:(1)

PSN #1(1)

Not Regulated------PSN #2

PSN #3

PSN #4

When "Not regulated," enter the proper freight classification, "MSDS Number," and "Product Name" on theshipping paperwork.

Not regulated

Canadian TDG Hazard Class & PIN:

* * * Section 15 - Regulatory Information * * *

US Federal Regulations

A: General Product Information

All electrical equipment must be suitable for use in hazardous atmospheres involving aluminum powder in

accordance with 29 CFR 1910.307. The National Electrical Code, NFPA 70, contains guidelines for determining thetype and design of equipment and installation which will meet this requirement.

Page 7 of 10

____________________________________________________________

Issue Date: 08/14/00 Revision: 2.0000Print Date: 08/14/00

B: Component Analysis

This material contains one or more of the following chemicals required to be identified under SARA Section 302 (40CFR 355 Appendix A), SARA Section 313 (40 CFR 372.65) and/or CERCLA (40 CFR 302.4).

Aluminum (7429-90-5)

SARA 313:form R reporting required for 1.0% de minimis concentration (fume or dust only) Chromium (7440-47-3)

SARA 313:form R reporting required for 1.0% de minimis concentration

CERCLA:final RQ = 5000 pounds (2270 kg) (no reporting of releases of this hazardous material is

required if the diameter of the pieces of the solid metal released is equal to or exceeds0.004 inches)SARA 311/312 Physical and Health Hazard Categories:

Immediate (acute) Health Hazard:Delayed (chronic) Health Hazard:

Fire Hazard:

Sudden Release of Pressure:

Reactive:

Yes, if particulates/fumes generated during processing.Yes, if particulates/fumes generated during processing.No No

Yes, if molten

State Regulations

A: General Product Information

PENNSYLVANIA "Special Hazardous Substance": Chromium compounds, hexavalent Chemical(s) known to the State of California to cause cancer: Hexavalent chromium

B: Component Analysis - State

The following components appear on one or more of the following state hazardous substances lists:Component Aluminum Chromium

CAS #7429-90-57440-47-3

CA Yes Yes

FL Yes Yes

MA Yes Yes

MN Yes Yes

NJ Yes Yes

PA Yes Yes

Other Regulations

A: General Product Information

In reference to Title VI of the Clean Air Act of 1990, this material does not contain nor was it manufactured usingozone-depleting chemicals.

B: Component Analysis - WHMIS IDL

The following components are identified under the Canadian Hazardous Products Act Ingredient Disclosure List:Component CAS #Minimum ConcentrationAluminum 7429-90-51% item 47 (197)

C: Component Analysis - InventoryComponent CAS #Aluminum 7429-90-5Chromium 7440-47-3

TSCA

Yes Yes DSL Yes Yes EINECS Yes Yes AUST. Yes Yes MITI No No

Note: Pure metals are not specifically listed by CAS or MITI number. The class of compounds for each of thesemetals is listed on the MITI inventory.

Page 8 of 10

____________________________________________________________

Issue Date: 08/14/00 Revision: 2.0000Print Date: 08/14/00

* * * Section 16 - Other Information * * *

MSDS History

Original: March 16, 1990Supersedes: March 4, 1999Revised: August 14, 2000

MSDS Status

Changes in Sections 1 and 2.

Prepared By

Hazardous Materials Control Committee.

MSDS System Number

115949

Other Information

= Aluminum Association’s Bulletin F-1, "Guidelines for Handling Aluminum Fines Generated During VariousAluminum Fabricating Operations." The Aluminum Association, 900 19th Street, N.W., Washington, DC 20006.= Aluminum Association, "Guidelines for Handling Molten Aluminum, The Aluminum Association, 900 19th Street,N.W., Washington, DC 20006.

= NFPA 65, Standard for Processing and Finishing of Aluminum (NFPA phone: 800-344-3555)= NFPA 651, Standard for Manufacture of Aluminum and Magnesium Powder

= NFPA 70, Standard for National Electrical Code (Electrical Equipment, Grounding and Bonding)= NFPA 77, Standard for Static Electricity

Hygienists (ACGIH).

the American Conference of Governmental Industrial Hygienists, Inc. (ACGIH).

G. D. and Clayton, F. E.: New York: John Wiley & Sons, Inc.Page 9 of 10

____________________________________________________________

Issue Date: 08/14/00 Revision: 2.0000Print Date: 08/14/00

Material Name: WROUGHT ALUMINUM PRODUCTS, 1xxx SERIES ALLOYS

Key-Legend:ACGIH American Conference of Governmental Industrial HygienistsAICS Australian Inventory of Chemical SubstancesCAS Chemical Abstract Service

CERCLA Comprehensive Environmental Response, Compensation, and Liability ActCFR Code of Federal RegulationsCPR Cardio-pulmonary ResuscitationDOT Department of TransportationDSL Domestic Substances List (Canada)ECOIN European Core InventoryE P A Environmental Protection ActIARC International Agency for Research on CancerLC 50Lethal concentration (50 percent kill)LC Lo Lowest published lethal concentrationLD 50Lethal dose (50 percent kill)LD Lo Lowest published lethal doseNFPA National Fire Protection AssociationNIOSH National Institute for Occupational Safety and HealthNTP National Toxicology ProgramOEL Occupational Exposure LimitOSHA Occupational Safety and Health AdministrationPEL Permissible Exposure LimitPIN Product Identification NumberRCRA Resource Conservation and Recovery ActSARA Superfund Amendments and Reauthorization ActSTEL Short Term Exposure LimitTCLP Toxic Chemicals Leachate ProgramTDG Transportation of Dangerous GoodsTLV Threshold Limit ValueTSCA Toxic Substance Control ActTWA Time Weighted Averageatm atmosphere cm centimeter g, gmgram in inch kg kilogram lb pound m meter mg milligram ml, MLmilliliter mm millimeter n.o.s. not otherwise specifiedppb parts per billionppm parts per millionpsia pounds per square inch absoluteu micron ug microgram

ID: 663

INFORMATION HEREIN IS GIVEN IN GOOD FAITH AS AUTHORITATIVE AND VALID; HOWEVER, NOWARRANTY, EXPRESS OR IMPLIED, CAN BE MADE.

This is the end of MSDS # 663

Page 10 of 10

____________________________________________________________

Issue Date: 08/14/00 Revision: 2.0000Print Date: 08/14/00

转载请注明出处范文大全网 » 英文版夏洛的网读后感