范文一:数控车实训工作总结
数控车实训工作总结
根据学校教务处的安排为期四周的数控车集中实训。使学生掌握了数控车的基本操作技巧和方法,并能够独立完成对普通零件的车削加工。现将这一阶段的实训工作小结如下:
一、实训内容:
模块一、数控车基本操作
1. 数控车床(HNC21/22T)控制面板的介绍(包括软件功能键、机床操作面板、程序输入、修改、编辑操作面板等)。
2. 程序的输入、编辑、校验。
3. 完成各种刀具的对刀(刀补、刀尖方位的输入)。
4. 会使用刀具磨损值,进行刀具补偿。
5. 写出实训小结(通过测量自己的工件,指出存在的问题及问题存在的原因、解决方法)。
模块二、轴类零件的编程与加工操作
1. 编写轴类零件的加工程序。
2. 将程序输入机床并校验,模拟走刀路径是否正确。
3. 写出轴类零件加工工艺流程。
4. 完成对刀,进行首件试切。
5. 写出实训小结(通过测量自己的工件,指出存在的问题及问题存在的原因、解决方法)。
模块三、螺纹的编程与加工操作
1. 掌握有关螺纹的基本概念及相关参数的计算。
2. 螺纹编程指令的应用。
3. 编写三角形螺纹的加工程序。
4. 对螺纹刀,进行首件试切。
5. 写出实训小结(通过测量自己的工件,指出存在的问题及问题存在的原因、解决方法)。
模块四、轴套配合件的编程与加工操作
1. 掌握轴套配合件加工的工艺流程。
2. 编写轴、套的加工程序。
3. 先加工轴,后加工套,并进行试配。
4. 写出实训小结(通过测量自己的工件,指出存在的问题及问题存在的原因、解决方法)。
二、学生掌握情况
1. 对最基本的操作学生掌握比较好(如程序的输入、编辑、校验、对刀及刀补的输入等)。
2. 对轴类零件的编程、加工操作及工艺流程学生普遍掌握比较好,都能够独立完成对工件的加工。
3. 对于螺纹加工方面80%的学生都能够熟练操作,10%的学生操作不够熟练,其余10%的学生对螺纹的编程、对刀及加工比较含糊,在别人的指导下勉强能够完成加工。
4. 轴套配合件加工相对而言比较难,只有70%的同学做的件能够配合上,其余同学不是轴的问题就是套的问题,配合不上。这部分学生相对掌握比较差。
三、存在的问题
1. 个别学生学习态度不端正,进入实训室不安心操作。
2. 个别学生对理论知识掌握不够扎实,造成编程障碍。
3. 人多床子少,一部分学生没有床子操作,实训作业也完成了,在实训室无所事是,显得实训课堂比较混乱,也对实训管理造成很大的麻烦。
4. 学生相对操作机床时间较少(即人均使用床子时间)。
5. 重复操作比较少,一个件学生只能做一个件,他对自己在第一次操作中所犯的错误不能在做同样的件时加工以改正。
四、解决方法
1. 加强对学生的思想认识教育,使他们端正学习态度。
2. 加强理论教学,为实训教学打下扎实基础。
3. 可采用分批实训的办法,使人均机床使用率提高。
4. 进一步完善实训管理办法(学生可以采用模块淘汰制教学,对于这门课总共需要完成几个模块,学的好的同学提前进入下一个模块学习,相对较差的同学可以对同一个模块多学一段时间;此外学习好的学生可以在规定的时间之前提前结束实训,这样为学的较差的同学多腾出一些训练时间)。
五、今后的打算
在今后的实训教学中,首先从自身做起,要求学生要完成的工件,自己提前先进行首件试切,寻找可能存在或可能发生的问题,为学生提前打好预防针;加强对学生的管理,使学生养成良好的操作习惯;多研究教材、教法使实训教学搞的更好。总之这只是本人的一点看法,其中有不完善的地方望领导批评指正。
范文二:数控车实训工作总结
----------专业最好文档,专业为你服务,急你所急,供你所需-------------
文档下载最佳的地方
中级数控车工培训班工作总结
根据教学安排~中级数控车工班~自2012年9月23日至2012年12月9日经过为期两个多月的数控车工理论知识培训和公共基地集中实训。使学员们掌握了数控车工的基本理论、操作技巧和方法~并能够独立完成对普通零件的车削加工。现将这一期中级数控车工培训班的工作小结如下:
一、 培训内容:
1(理论知识要求 :职业道德、职业守则、专业基础知识、加工准备知识、数控编程知识等。
2、数控车基本操作:
,1,数控车床,HNC21/22T,控制面板的介绍,包括软件功能键、机床操作面板、程序输入、修改、编辑操作面板等,。
,2,程序的输入、编辑、校验。
,3,完成各种刀具的对刀,刀补、刀尖方位的输入,。
,4,编写轴类零件的加工程序。
,5,将程序输入机床并校验~模拟走刀路径是否正确。
,6,完成对刀~进行首件试切。
,7,通过测量自己的工件~指出存在的问题及问题存在的原因、解决方法。
,8,数控车床日常维护及故障诊断。
二、学生掌握情况
1.对最基本的专业基础知识、加工准备知识学员掌握比较好,数控编程知识相对而言比较难~部分学员不是很容易掌握~编程需要较长时间。
2.在实际操作中对程序的输入、编辑、校验等掌握得比较快~加工
----------专业最好文档,专业为你服务,急你所急,供你所需-------------
文档下载最佳的地方
操作及工艺流程学员普遍掌握比较好~都能够独立完成对工件的普通加工。但对刀及精度要求中比较含糊~需要在老师的指导下完成。
3.对于螺纹加工方面~一般都能够熟练操作~但也有部分学员操作不够熟练~不是这个轴的问题就是对刀的问题~配合不好。
三、存在的问题
1.个别学员学习热情不高~遇到点困难就有些想要放弃。
2.个别学员对理论知识掌握不够扎实~造成编程障碍~往往要花上很长的时间~课后巩固不够。
3.有些学员实训作业完成了~对自己在操作中所犯的错误没有认真加以分析改正~不能在做差不多工件时有所提高。
4(在实际操作中没有养成良好的操作习惯~对机床、刀具等的日常维护方面有所欠缺。
四、解决方法
1.加强对学员的思想认识教育~使他们端正学习态度。
2. 在课程设置方面按照学员需求~加强理论教学~为实训教学打下扎实基础。
3.进一步完善培训管理~对于教学过程中~寻找可能存在或可能发生的问题~同时加强对学员的管理~使学员养成良好的学习和操作习惯~多研究教材大纲~使实训教学安排做的更好。
范文三:数控车实训工作总结
中级数控车工培训班工作总结
根据教学安排,中级数控车工班,自2012年9月23日至2012年12月9日经过为期两个多月的数控车工理论知识培训和公共基地集中实训。使学员们掌握了数控车工的基本理论、操作技巧和方法,并能够独立完成对普通零件的车削加工。现将这一期中级数控车工培训班的工作小结如下:
一、 培训内容:
1.理论知识要求 :职业道德、职业守则、专业基础知识、加工准备知识、数控编程知识等。
2、数控车基本操作:
(1)数控车床(HNC21/22T)控制面板的介绍(包括软件功能键、机床操作面板、程序输入、修改、编辑操作面板等)。
(2)程序的输入、编辑、校验。
(3)完成各种刀具的对刀(刀补、刀尖方位的输入)。
(4)编写轴类零件的加工程序。
(5)将程序输入机床并校验,模拟走刀路径是否正确。
(6)完成对刀,进行首件试切。
(7)通过测量自己的工件,指出存在的问题及问题存在的原因、解决方法。
(8)数控车床日常维护及故障诊断。
二、学生掌握情况
1. 对最基本的专业基础知识、加工准备知识学员掌握比较好;数控编程知识相对而言比较难,部分学员不是很容易掌握,编程需要较长时间。
2. 在实际操作中对程序的输入、编辑、校验等掌握得比较快,加工
操作及工艺流程学员普遍掌握比较好,都能够独立完成对工件的普通加工。但对刀及精度要求中比较含糊,需要在老师的指导下完成。
3. 对于螺纹加工方面,一般都能够熟练操作,但也有部分学员操作不够熟练,不是这个轴的问题就是对刀的问题,配合不好。
三、存在的问题
1. 个别学员学习热情不高,遇到点困难就有些想要放弃。
2. 个别学员对理论知识掌握不够扎实,造成编程障碍,往往要花上很长的时间,课后巩固不够。
3. 有些学员实训作业完成了,对自己在操作中所犯的错误没有认真加以分析改正,不能在做差不多工件时有所提高。
4.在实际操作中没有养成良好的操作习惯,对机床、刀具等的日常维护方面有所欠缺。
四、解决方法
1. 加强对学员的思想认识教育,使他们端正学习态度。
2. 在课程设置方面按照学员需求,加强理论教学,为实训教学打下扎实基础。
3. 进一步完善培训管理,对于教学过程中,寻找可能存在或可能发生的问题,同时加强对学员的管理,使学员养成良好的学习和操作习惯,多研究教材大纲,使实训教学安排做的更好。
范文四:数控车实训总结[经验]
数控车实训总结
姓名:***** 2010 年 12 月-2011 年 1 月 14 日 心得体会两周的数控机床操作实训转眼间就结束了,从第一天的懵懵懂懂 到现在已经基本掌握数控编程、仿真模拟、零件加工以及多种对刀和 机床操作方法。 本次实训使用的是华中数控模拟系统。实际操作之前,老师为我 们详细讲解并演示了数控铣床的操作方法以及操作注意事项。 在实际 操作时,认真按照老师的要求去做,遇到问题就向老师请教。老师对 提出的问题,总是耐心的解答。即使犯了错误,有的也只是鼓励。 数控编程与加工 老师给我们布置任务,我们按照工程图对零件进行初步分析,之 后便进行编程工作,在编程过程中遇到了很多问题,老师详细的讲解 使我对数控编程有了进一步的深刻领悟,并基本掌握数控程序的编 制。并很快编好了要加工的零件程序。 零件的加工 此次试训的零件要在数控车床、数控铣床上加工,加工前在机床 上仔细校验程序,并对错误进行更改,之后进行加工操作,并很快加 工出了成品合格零件。 总之,本次数控实训确实比以前提高了水平,尤其在实际操作方 面和编程方面。 遗憾的是时间有些短, 通过实训也发现了自己的不足。 比如说程序的编制还不熟练,加工工艺方面还有待提高,实践经验还 比较欠缺。今后要虚心学习,继续提高自己的水平。 我相信通过我的努力,我以后一定会改掉这些缺点的.我坚信通 过这一段时间的实习,所获得的实践经验对我终身受益,在我毕业后 的实际工作中将不断的得到验证, 我会不断的理解和体会实习中所学 到的知识, 在未来的工作中我将把我所学到的理论知识和实践经验不 断的应用到实际工作来,充分展示自我的个人价值和人生价值。为实 现自我的理想和光明的前程努力。
---------------------------------------
在课堂上学习电子数控专业大部分都是理论知识,所以我很珍惜这次实习机会,认真的听老师的讲解和介绍,观察每一个机械的构造和零件,以及学习它的实用方法,和理论知识相结合,才能理解的更透彻。
实习参观是数控机床。首先我们同学按顺序进去参观,然后上课的老师给我介绍一下参观时应该注意那些要求,不要乱碰机械,也不能乱按开关等。然后我们在老师的教导下通过上机学会了数控车床的程序编写,因为是电脑操作,所以我们首先必须学会电脑能够识别的语言、指令等,这样我们才能正确输入指令操控电脑,得到我们需要的产品。在编写好程序后,我们可以观看仿真模拟,预先知道该程序是否符合要求和标准,最后接触机床,将编好的程序输入数控机床,一切都是自动化的,零件很快就加工好了,符合我们的要求,所以数控机床很具有时代性。据说,数控机床的发展和换代几乎与计算机是同步发展的。
通过这次实习我们了解了现代机械制造工业的生产方式和工艺过程。熟悉工程材料主要成形方法和主要机械加工方法及其所用主要设备的工作原理和典型结构、工夹量具的使用以及安全操作技术。了解机械制造工艺知识和新工艺、新技术、新设备在机械制造http://www.chddh.cn/wenzi/中的应用。在工程材料主要成形加工方法和主要机械加工方法上,具有初步的独立操作技能。在了解、熟悉和掌握一定的工程基础知识和操作技能过程中,培养、提高和加强了我们的工程实践能力、创新意识和创新能力。这次实习,让我们明白做事要认真小心细致,不得有半点马虎。同时也培养了我们坚强不屈的本质,不到最后一秒决不放弃的毅力~培养和锻炼了劳动观点、质量和经济观念,强化遵守劳动纪律、遵守安全技术规则和爱护国家财产的自觉性,提高了我们的整体综合素质。在整个实习过程中,老师对我们的纪律要求非常严格,制订了学生实习守则,同时加强清理机床场地、遵守各工种的安全操作规程等要求,对学生的综合工程素质培养起到了较好的促进作用。
生平第一次有种“学以致用”的感觉,内心很有成就感,也真切的体会到真理必须要用实践去检验,不亲自去动手试验一下。有很多东西是书上没有的,只有在实践中才能体会得到,纸上谈兵只会让人走进
误区,实践才是永远的老师。它带给我们的不仅仅是经验,它还让我们知道什么叫工作精神和严谨认真的作风。在以后的学习生涯中我更应该真人学习,将来成为一个出色的专业人才,这次实习让我懂得什么叫“纸上得来终觉浅,投身实践览真知”。
我很快我就要步入社会,面临就业了就业单位不会像老师那样点点滴滴细致入微地把要做的工作告诉我更多的需要我自己去观察、学习。不具备这项能力就难以胜任未来的挑战。随着科学的迅猛发展,新技术的广泛应用,会有很多领域是未曾接触过的只有敢于去尝试才能有所突破,有所创新。就像我接触到车工,虽然它危险性很大,但是要求每个同学都要去操作而
且要作出成品,这样就锻炼了大家敢于尝试的勇气。三周的金工实习带给我不全是所接触到那些操作技能,也不仅仅是通过几项工种所要求我锻炼的几种能力,更多的则需要我每个人在实习结束后根据自己的情况去感悟,去反思,勤时自勉,有所收获,使这次实习达到真正目的。
?通过这次实习我解了现代机械制造工业的生产方式和工艺过程。熟悉工程资料主要成形方法和主要机械加工方法及其所用主要设备的工作原理和典型结构、工夹量具的使用以及平安操作技术。解机械制造工艺知识和新工艺、新技术、新设备在机械制造中的应用。
?在工程资料主要成形加工方法和主要机械加工方法上,具有初步的独立操作技能。
?在解、熟悉和掌握一定的工程基础知识和操作技能过程中,培
养、提高和加强了工程实践能力、创新意识和创新能力。
?这次实习,让我明白做事要认真小心细致,不得有半点马虎。同时也培养了坚强不屈的实质,不到最后一秒决不放弃的毅力~
?培养和锻炼了劳动观点、质量和经济观念,强化遵守劳动纪律、遵守平安技术规则和爱护国家财产的自觉性,提高了整体综合素质。
?在整个实习过程中,老师对我纪律要求非常严格,制订了学生实习守则,同时加强清理机床场地、遵守各工种的平安操作规程等要求,对学生的综合工程素质培养起到较好的促进作用。
本文来自:长大导航文字网【http://www.chddh.cn/wenzi/】详细出处参考:http://www.chddh.cn/wenzi/3013.html转载请注明出处,谢谢~
范文五:数控车实训总结(Summary of NC Lathe Training)
数控车实训总结(Summary of NC Lathe Training)
Name: a December 2010 -2011 year in January 14th the experience of CNC machine operation training in two weeks between the end, from the first day of the unsuspectingly now has basically master NC programming, simulation, machining and a variety of knife and machine operation method. This training is using Huazhong numerical control simulation system. Before the actual operation, the teacher explained and demonstrated the operation method of CNC milling machine as well as the operation notes for us. In the actual operation, seriously according to the teacher's request to do, when problems encountered, ask the teacher for advice. The teacher is always patient with the questions he asks. Even if you make a mistake, some are just encouragement. NC programming and machining of the teacher assigned us the task, we follow the engineering drawings of parts are analyzed, then carries on the programming work, in the programming process has encountered many problems, the teacher explained in detail so that I have a profound understanding to NC programming, programming and the master NC program. And quickly prepared the parts to be processed procedures. The trial machining parts machining in CNC lathe, CNC milling machine, machining in machine carefully check program, the change and the errors, after the processing operation, and soon finished processing qualified parts. In a word, this NC training is really better than before, especially in the field of practical operation and programming. Unfortunately, the time is short, through training also found their shortcomings. For example, the preparation of procedures is still not skilled, processing technology needs to be improved, and the practical experience is still relatively lacking. In the future, we should study with an open mind and
continue to improve our standards. I believe that through my efforts, I will overcome these shortcomings. I firmly believe that through this period of internship, gained practical experience of lifelong benefit to me, in my actual work after graduation to get verification, I will continue to understand and experience in the practice of the acquired knowledge, in in the future work I will put what I have learned theoretical knowledge and practical experience constantly to the actual work, to fully demonstrate the personal value and the value of life. In order to realize self ideal and bright future.
---------------------------------------
In the classroom learning electronic NC professional most of theoretical knowledge, so I cherish this internship opportunities, carefully listen to the teacher's explanation and introduction, observe every mechanical structure and components, and study its practical method, and a combination of theoretical knowledge, to understand more thoroughly.
Internship visit is CNC machine tools. First of all, we students in order to visit, and then the class teacher introduced to me, visitors should pay attention to those requirements, do not touch machinery, nor can we press the switch. Then our teachers in the teaching through the machine learn CNC lathe programming, because the computer operation, so we must first identify the language instruction, etc. to learn the computer, so that we can correct the input command control computer, we need to get the product. To write a good program, we can watch the program simulation, know in advance whether it meets the requirements and standards, the last contact machine, input program CNC
machine tools will be good, everything is automated, parts quickly processed, meet our requirements, so it is with the times of CNC machine tools. It is said that the development and replacement of NC machine tools are almost synchronous with the development of computer.
Through this internship, we understand the modern machinery manufacturing industry production methods and processes. Familiar with engineering materials, main forming methods and main mechanical processing methods and the working principle and typical structure of the main equipment used, the use of clamping and measuring tools, and safety operation techniques. Knowledge of mechanical manufacturing process, application of new technology, new technology and new equipment in mechanical manufacturing http://www.chddh.cn/wenzi/. In engineering materials, main forming methods and main mechanical processing methods, with preliminary independent operation skills.
In the process of understanding, understanding and mastering certain basic knowledge and operation skills of engineering, training, improving and strengthening our engineering practice ability, innovation consciousness and innovation ability. This internship, let us understand that things should be serious, careful, careful, not the slightest careless. At the same time also cultivate the essence of our firm and inflexible, not until the last minute and never give up! Training and training of the labor point of view, quality and economic concepts, and strengthen the observance of labor discipline, compliance with safety technical rules and national awareness of property protection, and improve our overall quality. In the training process, the teacher of our discipline is very strict, making
the student code of conduct, while strengthening the cleaning machine for site, comply with the safety rules of the various types of work requirements, comprehensive engineering quality training of students has played a good role in promoting.
For the first time in my life, I have the feeling of "applying what I have learned", and I feel a sense of achievement in my heart. I also have a real understanding of the truth. I have to test it with practice. I don't try it myself. There are many things that are not in the book, only in practice can be realized, on paper will only let people into the wrong, practice is eternal teacher. It brings us not only experience, but also let us know what is the spirit of work and rigorous style of work seriously. In the future study career, I should learn from the real person, in the future to become a good professional, and this internship let me know what is called "paper on the end of sleep," and into practice, "real knowledge."".
I will soon enter the society, facing employment, employment units will not be as small as the teacher, nuanced work to do to tell me, more I need to observe and learn. Without this ability, it will be difficult to meet the challenges of the future. With the rapid development of science and technology, the extensive application of new technology will have many areas have not been exposed, only dare to try to be able to make breakthroughs and innovation. I like to contact Turner, although it is very dangerous, but everyone will go to operation
And to make the finished product, so that everyone has the courage to try. Three weeks of metalworking practice gives me was not exposed to those skills, not only is the ability of
several I exercise required by several types of work, the more I need everyone to review after the end of the internship according to their own circumstances, when the ground to sentiment, appreciation, harvest, to reach this internship real purpose.
Through this internship, I understand the modern machinery manufacturing industry production methods and processes. Familiar with engineering data, main forming methods and main mechanical processing methods, the working principle and typical structure of main equipment used, the use of clamp and gauge, and safe operation technique. Understand the knowledge of mechanical manufacturing process and the application of new technology, new technology and new equipment in mechanical manufacturing.
It has preliminary independent operation skills in the main forming methods and main mechanical processing methods of Engineering data.
In training, improving and strengthening the engineering practice ability, innovation consciousness and innovation ability in the process of understanding, grasping and mastering certain basic knowledge and operation skills of the project.
Fourth, this internship, let me understand that things should be serious, careful, careful, not the slightest careless. At the same time, but also cultivate the essence of firm and inflexible, not until the last minute and never give up!
Training and training the views of labor, quality and economic
concepts, strengthening the observance of labor discipline, compliance with sound technical rules and the awareness of the protection of state property, and improve the overall quality.
In the training process, the teacher of my discipline is very strict, making the student code of conduct, while strengthening the cleaning machine, abide by the rules of safe operation of various types of work site requirements, comprehensive engineering quality of students training plays a better role in promoting.
This article comes from: long navigation text network [http://www.chddh.cn/wenzi/] detailed source reference: http://www.chddh.cn/wenzi/3013.html reprinted please indicate the source, thank you!